-
DC Power Supply Board Only, 120 or 230VAC input, 12V@4A or 24V@3A output DC Power Supply Board Only, 120 or 230VAC input, 12V@4A or 24V@3A output, Battery Charger, Main & Aux Outputs, low battery cutoff, AC and System Fault relays
-
Features
- 4G LTE
- GPS for location tracking
- Accelerometer for movement detection
- Backup battery
- Works with the Alarm.com Mobile App
Benefits
- Real-time car status
- Driver safety alerts
- Diagnostics and security alerts
- Plug-and-play installation
- Works with vehicles with an OBD-II port (standard on vehicles manufactured in 1996 or later. Hybrid and electric vehicles are not currently supported.
-
https://www.youtube.com/watch?v=Ll96OHvzBPI
-
8in LTE MMCX Antenna (Diversity) for LTE modules. This antenna is rated for indoor use only. LTE modules also require the 6ft LTE MMCX Antenna (Primary) (SKU: ADC-ANT-LTE-P).
-
8 Auxiliary Output Board; Each output selectable for constant output, output enable on FAI, output disable on FAI; Class II power limited outputs, 2.5A maximum per output
-
6ft LTE MMCX Antenna (Primary) for LTE modules. Antenna is rated for indoor use only. LTE modules also require a secondary antenna (Diversity) (SKU: ADC-ANT-LTE-D).
-
6ft 3G MMCX Indoor Antenna - This is the standard antenna included with 3G CDMA/HSPA modules and is rated for indoor use only.
-
ADC-SVR122 500 GB 2.5in Hard Disk Drive
-
5 inch 3G MMCX Indoor Antenna - This antenna is rated for indoor use only.
-
256 GB MicroSD Card approved for use with Alarm.com products and services.
-
24" x 20" Enclosure with Mercury Backplate, fits up to 6 ADC-AC-MR52 expansion modules
-
20" x 16" Enclosure with Mercury Backplate, fits up to 4 ADC-AC-MR52 expansion modules
-
18ft 3G and LTE MMCX Indoor Antenna - This antenna is not rated for outdoor use.
-
180 Degree HD Camera with Enhanced Zoom and Two-Way Audio
Specifications
Recording compression H.264 Image sensor 1/2.9” CMOS, 6.8 MP, 3096 x 2202 Lens/angle of view 1.62 mm, F2.3, 180° Low-light sensitivity 0 lux with IR IR range Up to ~15 feet (5m) Image adjustments Flip, brightness, contrast, saturation, sharpness, exposure Wireless connectivity 802.11 b/g/n, 2.4 & 5 GHz Operating temperature 32°F - 104°F (0°C - 40°C) Operating humidity 20% - 80% (non-condensing) RH Max power consumption 12V DC, 12W Dimensions (L x W x H) 3.125 x 3.125 x 5.2” (7.9 x 7.9 x 13.2 cm) -
14" x 12" Enclosure with Mercury Backplate, fits up to 2 ADC-AC-MR52 expansion modules, or 1 ADC-AC-LP1501 with one expansion module (either ADC-AC-MR50 or ADC-AC-MR52)
-
Receives Z-Wave communication, and repeats it on to other Z-Wave devices in your network increasing your network?s accuracy. Designed to be as small and as compact as possible so that it doesn't block neighboring power outlets.
-
Meter for monitoring entire home and individual circuit energy usage.
-
Meter for monitoring whole home and individual circuit energy usage (2nd Generation).
-
The Flex IO enables new levels of flexibility for monitoring valuable property and assets anywhere that LTE connectivity is available. Whether used with a backyard gate or a remote storage unit, the Flex IO empowers users to keep an eye on what matters most. It can be used with the included magnet to monitor doors, gates, and other entryways. It also comes equipped with input and output options for integrating compatible devices that lack long-range connectivity.
Features
- Detect open/close using magnetic reed switch
- Detect state change for third-party device using Loop Input
- Change state of third-party and device using Relay Output (requires DC power to support always-on cellular connection)
